Designed to be attached and re-attached to the burner as often as required. RL Enterprises™ Butane/Propane Mix Gas Cartridge has a typical burning time of 2.75 hours.

An excellent solution for heating, sterilization and combustion in the laboratory. R&L Enterprises™ Meker Brass Bunsen Burners with Gas Cartridge are designed for use with butane/propane mix gas cartridges.

Gas burner head only

Use this well-constructed safety spark lighter for all your burner ignition needs. Cole-Parmer™ Spark Bunsen Burner Lighter uses a large renewable flint that produces up to 1500 ignitions.

Functions without flint, fuel, batteries or wires. Azpack™ Piezo Gas Lighter is suitable for use with all common fuel gases.

Manufactured from plastic, the BOCHEM™ Gas Lighter PIEZO can be used in a variety of lab settings.

Provides excellent support to beakers and other glassware during heating on ring stands. R&L Enterprises Wire Gauze with Ceramic Center is a flat square manufactured from galvanized iron mesh.

An excellent solution for heating, sterilization and combustion in the laboratory. R&L Enterprises™ 13mm Natural Gas Bunsen Burners have a typical gas consumption of 107.5L per hour.

Enhance your experimentation using an Alcohol Burner with wick and cap when applying heat to laboratory substances.

An excellent solution for heating, sterilization and combustion in the laboratory. R&L Enterprises™ LPG Propane and Butane Bunsen Burners are designed to work at propane 35 millibars and butane 28 millibars with the appropriate pressure reduction valves being fitted to the gas cylinders.

Incorporates a gas control stopcock and pilot ignition flame.

An excellent solution for heating, sterilization and combustion in the laboratory. R&L Enterprises™ 13mm LPG Bunsen Burners have a typical gas consumption of 107.5L per hour.

Supplied with a flame failure device that shuts off the gas supply to the burner within approximately 20 seconds of the flame being extinguished.

Gas cartridge, with safety valve.

Incorporates a gas control stopcock and pilot ignition flame.

An excellent solution for heating, sterilization and combustion in the laboratory. R&L Enterprises™ Universal Bunsen Burners are designed to use a wide range of gases.

Provides excellent support to beakers and other glassware during heating on ring stands.Fisherbrand™ Wire Gauze is a flat square manufactured from galvanized iron mesh.

Manufactured out of brass and are all nickel plated.

Use the Bochem™ Steel Gas LIghter for igniting gases in the laboratory.

Ideal for microscopy applications

Supplied with a flame failure device that shuts off the gas supply to the burner within approximately 20 seconds of the flame being extinguished.

Reaches temperatures of about 900°C with butane nozzles and about 1000°C on natural gas spouts.

The spirit lamp is an alternative to the gas-powered Bunsen burner and is also suitable for heating cooking glasses and the materials they contain.

Supplied with a flame failure device that shuts off the gas supply to the burner within approximately 20 seconds of the flame being extinguished.

Provides excellent support to beakers and other glassware during heating on ring stands and tripods. R&L Enterprises™ Steel Wire Gauze is a flat square manufactured from steel mesh.

Insert the Wick in a wick holder for various laboratory applications requiring exposure to being heated..

An excellent solution for heating, sterilization and combustion in the laboratory. R&L Enterprises™ Coal Gas Bunsen Burners generally produce the hottest flame possible.

Tested for flame quality and leakage prior to packing.